Filter
Top Products
15
PB41 Printer Quick Start Guide
2 To turn the radio off push the bl ue illuminating button
again.
S Pressing the blue illuminating button to turn the radio off
you will hear a double beep (sounds like a chirp).
ReplacingABatteryPack
UseonlythebatterypackdesignedforyourPB41
Printer. Use only the Intermec 2200 mAh Li-Ion
battery p/n 320-088-101. Using any other battery
may present a risk of fire or explosion. The
battery used in your PB41 Printer may present a
fire or chemical burn hazard if mistreated. Do not
disassemble, heat above 212°F ( 100°C), or
incinerate.
1 Op en the cover and p ush the battery lo ck tabs away while
lifting up the battery. The battery pack fits very tightly so it
takes some effort to remove them.
2 Insert the new battery by putting the non contact area of the
battery in first towards the center.
3 Push d o w n on the battery near the battery lock tabs. Ensure
that the battery is compl etel y seated and tab fits over the top
of the battery.
4 Ch arge the new battery.
5 Properly dispose of the old battery and keep batteries away
from children.
Battery lock tabs
(one on each side)
Center battery support posts
Battery packs