Filter
Top Products
13
PB41 Printer Quick Start Guide
Liner’ed Labels
If you are using liner’ed paper, it is best to use the manual paper
loading method.
Automatic Paper Loading
1 Press the red self-test button to wake the printer.
2 Wi th the l oose, clean edge of the paper c oming from the bot-
tom of the roll, insert the edge o f the paper between the roller
and the platen.
3 Pushing the button ag a in while the printer is awake causes
the mechanism to feed about one inch of paper.
4 Insert the paper into the paper well with it resting on the pa-
per rod clips.
Manual Paper Loading
1 Li ft up the paper release lever. This takes the pressure off the
platen. Make sure you have a clean edge on the new paper
roll.
2 Taketheedgeofthepaperandfoldit45degrees.
3 Insert the tip of the paper between the roll er and the platen.
4 Push on the paper until the tip is peeking out the other side.
(If it seems too tight to insert the tip, lift up the paper release
lever and turn the gear to advance the paper).
5 Grab the tip and pull it through until the paper is straight.