Filter
Top Products
15
14
Manual Switching
There are two convenient methods to access the computers:
Manual – pressing the port selection pushbuttons located on the unit’s front panel.
Hotkey – entering key combinations from the keyboard. Hotkey port selection is discussed in the next
chapter.
Manual port selection
Press and release a port selection pushbutton to focus the computer on the corresponding port. The USB
and Audio focus do not change (expect a 2 sec delay).
Press a port selection pushbutton twice to focus the audio on the corresponding port (expect a 2 sec
delay).
Press and hold a port selection pushbutton for more than 2 seconds to change KVM, USB, and Audio
focus to the computer on the selected port.
Press and hold port selection pushbuttons 1 and 2 for more than 2 seconds to start Auto Scan Mode.
Basic Operation