Filter
Top Products
26
27
Firmware Upgrade Mode
To set the KVM to Firmware Upgrade Mode:
1. Invoke your HSM.
2. Key in: upgrade
3. Press [Enter].
The front panel LEDs ash to indicate Firmware Upgrade Mode is in effect. To exit Firmware Upgrade
Mode, you must power off the switch. See The Firmware Upgrade Utility for details
Keyboard Operating Platform
The KVM’s default port conguration is for a PC compatible keyboard. If you are using a PC compatible
keyboard and you have a Mac or Sun attached to a port, you can change the port’s keyboard operating
platform conguration to emulate a Mac or Sun keyboard.
The Firmware Upgrade Mode