Use DHCP/BOOTP: This option allows you to view
DHCP/ BOOTP status. If there is a DHCP/BOOTP
server on your network, this option allows the print
server to obtain IP-related settings automatically from
your DHCP server.
IP Address: This option allows you to view IP address
from the print server. The IP address must meet the IP
addressing requirements of the network segment.
Subnet Mask: This option allows you to view subnet
mask from the print server. The IP address must meet
the IP addressing requirements of the network
segment.
Web Based Configuration
Gateway’s IP: This option allows you to view gateway
from the print server. The IP address of the gateway
must meet the router or gateway to go across of the
network segment.
Netware Status
This section displays the current NetWare Settings of
the wireless print server.
60