Filter
Top Products
A-13
Cisco ONS 15454 SDH Procedure Guide, R7.0
November 2005
Appendix A CTC Information and Shortcuts
Equipment Inventory
• Service State—Displays the current card service state, which is an autonomously generated state
that gives the overall condition of the card. Service states appear in the format: Primary
State-Primary State Qualifier, Secondary State. For more information about card states, refer to the
“Administrative and Service States” appendix of the Cisco ONS 15454 SDH Reference Manual.
Card service states include:
–
Unlocked-enabled
–
Unlocked-disabled,automaticInService and mismatchOfEquipment
–
Unlocked-disabled,automaticInService and softwareDownload
–
Unlocked-disabled,automaticInService and notInstalled
–
Unlocked-disabled,mismatchOfEquipment
–
Unlocked-disabled,softwareDownload
–
Unlocked-disabled,notInstalled
–
Locked-disabled,mismatchOfEquipment and maintenance
–
Locked-disabled,mismatchOfEquipment and unassigned
–
Locked-disabled,maintenance and softwareDownload
–
Locked-disabled,maintenance and notInstalled
–
Locked-disabled,unassigned
–
Locked-disabled,unassigned and notInstalled
–
Locked-enabled,maintenance
• HW Part #—Displays the hardware part number; this number is printed on the top of the card or
equipment piece.
• HW Rev—Displays the hardware revision number.
• Serial #—Displays the equipment serial number; this number is unique to each card.
• CLEI Code—Displays the Common Language Equipment Identifier code.
• Firmware Rev—Displays the revision number of the software used by the application-specific
integrated circuit (ASIC) chip installed on the ONS 15454 SDH cards.
• Product ID—Displays the manufacturing product identifier for a hardware component, such as a fan
tray, chassis, or card. The Product ID column displays “N/A” for equipment existing before
Software Release 4.6.
• Version ID—Displays the manufacturing version identifier for a fan tray, chassis, or card. The
Version ID column displays “N/A” for equipment existing before Software R4.6.