Filter
Top Products
A-7
Cisco ONS 15454 SDH Procedure Guide, R7.0
November 2005
Appendix A CTC Information and Shortcuts
Manage the CTC Window
Tools Circuits — Displays the following options:
• Repair Circuits—(ONS 15454 only) Repairs incomplete circuits following
replacement of the ONS 15454 SDH alarm interface panel (AIP). Refer to
the Cisco ONS 15454 SDH Troubleshooting Guide for more information.
• Reconfigure Circuits—Allows you to reconfigure circuits. For more
information, refer to the Cisco ONS 15454 SDH Reference Manual.
• Set Path Selector Attributes—Allows you to edit subnetwork connection
protection (SNCP) circuit path selector attributes. See the “DLP-D233 Edit
SNCP Circuit Path Selectors” task on page 19-29.
• Set Circuit State—Allows you to change a circuit state. See the “DLP-D230
Change a Circuit State” task on page 19-26.
• Roll Circuit—Allows you to reroute live traffic without interrupting service.
• Delete Rolls—Removes rolls that are not deleted by CTC after a roll has
been completed.
Overhead Circuits — Displays the Repair IP Tunnels option, which fixes circuits that are in the
PARTIAL status as a result of node IP address changes. See the “DLP-D30
Repair an IP Tunnel” task on page 17-25.
Topology Upgrade — Displays the following options:
• Convert SNCP to MS-SPRing—Converts SNCP to MS-SPRing. See the
“NTP-D210 Convert an SNCP to a Two-Fiber MS-SPRing Manually”
section on page 13-14.
• Convert Unprotected to SNCP—Converts a point-to-point or linear
add/drop multiplexer (ADM) to SNCP. See “NTP-D156 Convert a
Point-to-Point or Linear ADM to an SNCP Manually” section on
page 13-11
Manage VLANs — Displays a list of VLANs that have been created and allows you to delete
VLANs. See the “DLP-D34 Delete VLANs” task on page 17-27.
Open TL1
Connection
Displays the TL1 window, which allows you to enter TL1 commands.
Open IOS
Connection
Displays the Cisco IOS command line interface dialog box if a Cisco IOS
capable card (ML1000-2 or ML100T-12) is installed in the node. Refer to the
Ethernet Card Software Feature and Configuration Guide for the
Cisco ONS 15454, Cisco ONS 15454 SDH, and Cisco ONS 15327.
Update CTC
—
Allows you to update CTC to a newer version, if a newer version was found
during network discovery.
Help Contents and Index — Displays the online help window.
User Manuals — Displays the Cisco ONS 15454 SDH documentation.
About CTC — Displays the software version and the nodes in the CTC session.
Table A-3 CTC Menu and Toolbar Options (continued)
Menu Menu Option Toolbar Description