Filter
Top Products
27
Basic Operations
5.
Adjusting the Sound Volume
Ⅵ To increase the volume : press [VOLUME] ª (0 ➞ 50)
Ⅵ To lower the volume : press [VOLUME] · (50 ➞ 0)
When “Menu display” (☞ page 39)
is set to “15sec”, after pressing the
[VOLUME] button, the sound vol-
ume display will appear on the
screen for about 15 seconds.
(Press [EXIT] button to immedi-
ately remove the “Audio-Vol” dis-
play.)
Note
• When the sound volume is displayed on the screen, pressing
the [PRESET] button will reset the set value to “0”.
Note
• The [OPERATE] button will not work for approximately 1 minute
from when the light-source lamp is turned on. Wait approxi-
mately 1 minute before pressing.
Caution
• Please do not pull out the plug from the power source when
the [STAND BY] indicator is blinking. It will shorten the life of
the lamp and cause a malfunction.
MENU
V-KEYSTONE
PC
LAMP
H-KEYSTONE VOL.
EXIT
ENTER
VIDEO
TEMP
STAND BY
OPERATE
5
QUICK ALIGN.
PC VIDEO
VOLUME
PRESET HIDE
ENTER
MENU EXIT
FREEZE
OPERATE
V-KEYSTONE H-KEYSTONE
SCREEN
DIGITAL
ZOOM
FOCUS
W
S
5
6-
1
6-
1
VOL.
VOLUME
Audio-Vol 12
Audio-Vol 12
6.
Power Off
1 Press the [OPERATE] button on the projector (or the [OP-
ERATE] button on the remote control unit ) for 1 second or
more
• The [OPERATE] indicator will disappear, the [STAND BY] in-
dicator starts to blink, and the projector goes into the cool-
down mode. The [STAND BY] indicator will continue blinking
for approximately 90 seconds as the temperature of the light
source lamp cools (Cool Down Mode).
Projector:
Control panel
Remote
control unit
Screen display
Tur n off
Projector: Indicator
Blink
Projector:
Control panel
Remote
control unit
2 Plug out the power cord from wall outlet
LAMP TEMP
OPERATE
OPERATE
STAND BY
OPERATE