Filter
Top Products
18
Setup
Connection During Two-Screen/Four-
Screen Mode Display
The two-screen/four-screen mode enables simultaneous display of signals from two or four computers.
To select the two-screen mode, set “Display Mode” in the Setting menu to “Double”. To select the four-screen mode, set it
to “Cross”. (A Page 27)
Ⅵ Possible Input Signals and Projected Image
NOTE:
● This projector converts the frame rate to 60 Hz regardless of the synchronizing signal frequency at the computer’s end.
● The respective signals are displayed at the center of the split screen.
● When in the two-screen mode, the screen appears blue (or black depending on the setting) when there is no input.
Connecting Video Signals of
the Computer (Cont’d)
Computer 1, Computer 2
Output Status
Resolution
Channel
Link Status
2048
ן
1200
1ch
Single Normal
2048
ן
1200
2048
ן
1080
1ch
Single Normal
2048
ן
1080
1920
ן
1200
1ch
Single Normal
1920
ן
1200
1920
ן
1080
1ch
Single Normal
1920
ן
1080
1600
ן
1200
1ch
Single Normal
1600
ן
1200
1280
ן
1024
1ch
Single Normal
1280
ן
1024
1024
ן
768
1ch
Single Normal
1024
ן
768
800
ן
600
1ch
Single Normal
800
ן
600
640
ן
480
1ch
Single Normal
640
ן
480
4096
DVI 1 DVI 3
2400
2048
4096
DVI 1
DVI 3
DVI 2
DVI 4
2400
1200
2048
Two-Screen Mode
(Example) DVI 1: 1920ן1080,
DVI 3: 1920ן1080
Four-Screen Mode
(Example) DVI 1: 2048ן1200, DVI 2: 1920ן1080,
DVI 3: 1024ן768, DVI 4: 1600ן1200
DLA-SH4_EN.book Page 18 Tuesday, January 15, 2008 6:07 PM