Filter
Top Products
33
Q indicates the factory default
Item Setting Value Description
E-Mail Setting For configuring the e-mail feature.
E-Mail
Q
ON
OFF
ON : Use the mail feature.
OFF : Do not use the mail feature.
E-Mail
Address
—
(Default Value: user@localhost)
For specifying the destination e-mail address.
NOTE:
● Specify an address up to a maximum of 64 characters.
● Make use of single-byte alphanumeric characters, “-”, “.”, “_”,
and “@”.
SMTP Server
Address
—
(Default Value: 1.1.1.1)
For specifying the address of the outgoing mail server.
NOTE:
● Specify an address up to a maximum of 15 characters.
● Make use of numbers and “.”.
E-Mail Auth.
Q
ON
OFF
ON : Enable the e-mail authentication feature.
OFF : Disable the e-mail authentication feature.
Auth. Type Q PLAIN
LOGIN
CRAM-MD5
For configuring the e-mail authentication type.
PLAIN : Set e-mail authentication to APLAINB.
LOGIN : Set e-mail authentication to ALOGINB.
CRAM-MD5 : Set e-mail authentication to ACRAM-MD5B.
Auth. User
Account
— For configuring the account name during e-mail authentication.
NOTE:
● Specify an address up to a maximum of 31 characters.
● Make use of single-byte alphanumeric characters and “-”.
Auth.
Password
— For configuring the password during e-mail authentication.
NOTE:
● Specify an address up to a maximum of 31 characters.
● Make use of single-byte alphanumeric characters and “-”.
Port No. Q 25
465
587
For configuring the SMTP server port number.
Test Mail — When the ASENDB button is clicked, the test mail with the
contents configured in the E-Mail Setting will be sent.
DLA-SH4_EN.book Page 33 Tuesday, January 15, 2008 6:07 PM