Filter
Top Products
27
Setting Menu
This menu is used for specifying the input level of the terminal and the display mode.
Q denotes the factory default.
Setting
Convergence
Lens
Option
Network
Mail
Logout
host PJ-1
user: root
Input Level
Main
Image
Standard
Display Mode
Enhanced
11
3
3
12
4
Single Double Cross
Item Setting Value Description
Input Level Q Standard
Enhanced
For specifying the input level of the video signals.
Standard : Set to this value under normal circumstances.
(Signal level 0 - 255)
Enhanced : For specifying when the signal level is between 16
and 235.
Display Mode Q Single
Double
Cross
For specifying the display mode of the projection screen.
Single : Displays input signals on a single screen.
Double : Displays two different input signals on two screens.
The left screen displays images of the DVI 1 terminal,
and the right screen displays images of the DVI 3
terminal.
Cross Displays four different input signals on four screens.
The top left screen displays images of the DVI 1 terminal,
the top right screen displays images of the DVI 2
terminal, the bottom left screen displays images of the
DVI 3 terminal, while the bottom right screen displays
images of the DVI 4 terminal.
NOTE:
● Please refer to AConnecting Video Signals of the ComputerB for
details. (A Page 16 - 19)
DLA-SH4_EN.book Page 27 Tuesday, January 15, 2008 6:07 PM