Filter
Top Products
19
[During MULTI PIP Operations]
(1)
Picture and Picture, Picture in Picture
:
(2) Others : Aspect switching is not possible.
FULL
4
3
16
9
4
3 9
16
JUST
NORMAL
3
4
ZOOM
4
3
16
9
For an elongated image
For a 4:3 image
Image is expanded
416
39
4
3
AUTO
PLASMA DISPLAY
INPUT
SURROUND
VOL
NR
PICTURE
SOUND
SET UP
ASPECT
PICTURE
POS. /SIZE
OFF TIMER
PC
MULTI
PIP
SWAP SELECT MOVE
ZOOM
NORMAL ZOOM FULL
AUTO JUST
ASPECT
INPUT MENU ENTER
-
+
VOL
NORMAL 16 : 9
Mode
NORMAL
ZOOM
FULL
JUST
AUTO
Explanation
NORMAL will display a 4:3 picture at its standard 4:3
size.
ZOOM mode magnifies the central section of the picture.
16:9 will display the picture at its maximum size but
with slight elongation.
JUST mode will display a 4:3 picture at its maximum
size but with aspect correction applied to the center of
the screen so that elongation is only apparent at the
left and right edges of the screen. The size of the picture
will depend on the original signal.
Picture
The display will automatically become enlarged
(depending on the picture source), allowing you to view
the picture at its maximum size.
Note:
AUTO mode is designed to automatically adjust the
aspect ratio to handle a mix of 16:9 and 4:3 program
material. Certain 4:3 program material, such as stock
market data screens, may occasionally cause the image
size to change unexpectedly. When viewing such
programs, it is recommended that the ASPECT be set
to NORMAL.
Changes in accordance
with the AUTO mode
setting (see page 34).
ASPECT Controls
The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.
ASPECT button
The aspect mode changes each time the
ASPECT button is pressed.
Notes:
(1) For PC signal input,
the mode switches between “NORMAL”, “ZOOM” and “FULL” only.
(2)
For a 1125 (1080) / 60i · 50i · 24p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input during
“COMPONENT” and “RGB” input signal mode, the mode is set to “FULL” mode, and switching is not possible.
Auto can be selected only during Video signal input.
(3)
The aspect mode is memorized separately for each input terminal (INPUT1, INPUT2 , INPUT3 and PC IN).
The aspect mode changes each time the ENTER
button is pressed.
[from the unit]
Notes: (1) Do not allow the picture to be displayed in 4:3 mode for an extended period, as this can cause a permanent
after-image to remain on the Plasma Display Panel.
(2) Using this function to display a picture with the aspect ratio changed from the original for the purpose of public
display or commercial gain may infringe on copyright laws.