JVC GD-V422U Computer Monitor User Manual


 
29
Digital Zoom
1
3
2
4
This displays an enlargement of the designated part of the
displayed image.
Display the Operation Guide.
Press to access Digital Zoom.
Select the area of the image to be enlarged.
The Operation Guide will be displayed.
Press on the enlargement location to select.
The cursor will move.
Return to normal display (quit Digital Zoom).
Notes:
(1) When power goes OFF (including Off Timer operation), Digital Zoom terminates.
(2) The Digital Zoom function cannot be selected while in the following operation states:
Multi-screen (MULTI DISPLAY).(see page 31)
Multi-viewer (Picture in Picture, Picture out Picture, Picture and Picture) operation. (see page 14)
(3) While Digital Zoom is in operation, Adjusting Picture Pos./Size cannot be used.
(4) For RGB / PC input signals, normal multi-display magnification is only available at the VGA, SVGA and XGA resolution.
(5) The Digital Zoom capability is functional for the following component signals:
525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24sF, 750 (720) / 60p · 50p, 1250 (1080) / 50i
(6) The Digital Zoom capability is functional for the following composite signals: NTSC, PAL, SECAM
(7)
Using this function to display an enlarged picture for the purpose of public display or commercial gain may infringe on copyright laws.
Press to exit from the Digital Zoom.
Select the magnification required for the enlarged display.
Each time this is pressed, the magnification factor changes. This
is shown in the image being displayed.
SURROUND
button
MUTE button
VOL button
OFF TIMER button
During Digital Zoom, only the
following keys can be operated.
×1 ×2 ×3
N R
MULTI
PIP
SWAP SELECT MOVE
INPUT
VOL
PICTURE
SOUND
SET UP
ASPECT
PICTURE
POS. /SIZE
OFF TIMER
PC
SURROUND
ZOOM
R - STANDBY
G POWER ON
INPUT MENU
ENTER
+
VOL
ZOOM
MOVE
R