JVC GM-V42PCEB Computer Monitor User Manual


 
19
ENGLISH
Adjusting the Color Temperature
The adjusted setting applies to all inputs.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/ to move the cursor (3) to
FUNCTION SELECT.
3
Press 3 to display the Function
Selection Menu.
4
Press 5/ to move the cursor (3) to
COLOR TEMP.
5
Press 2/3 to make an adjustment.
Each time you press the button, the color temperature
alternates between HIGH and LOW.
HIGH: To make the screen become bluish.
LOW: To make the screen become reddish.
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
Note:
To make a fine adjustment, adjust WHITE BALANCE (see
the right column).
Adjusting the White Balance
G GAIN, B GAIN and R GAIN can be finely adjusted
separately for HIGH and LOW settings of the color
temperature.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
WHITE BALANCE.
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 3 to display the White Balance
Adjustment Menu.
4
Press 5/ to move the cursor (3) to the
item you want to adjust.
5
Press 2/3 to adjust the selected item.
6
Repeat steps 4 and 5 to adjust the other
items.
7
Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
Notes:
Adjustable range will vary among the Monitors.
•“MAX may appear soon after you begin adjustment. This
is normal but not a malfunction.
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
Cursor (3)
* appears
only when you
have adjusted
the White
Balance (see
the right
column).
COLOR TEMP.
ASPECT
SIGNAL MODE
RGB/COMPO.
SYNC TERM.
reset
FUNCTION SELECT
ADJUST:
SELECT:
EXIT:
MENU
: HIGH
: PANORAMIC
: AUTO
: RGB
: HIGH
*
Cursor (3)
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: OFF
: OFF
: MODE1
: 1080i
R GAIN
G GAIN
B GAIN
sub menu
reset
ADJUST:
WHITE BALANCE:HIGH
SELECT:
EXIT:
MENU
: 000
: 001
: 002
+
14_23_GM_V42[E].p65 03.6.23, 4:43 PM19