JVC GM-V42PCEB Computer Monitor User Manual


 
25
ENGLISH
Cursor (3)
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: OFF
: OFF
: MODE1
: 1080i
Showing the On-screen When Changing
the Input Mode
With this function, you can see the selected input mode and
signal type when changing the input mode.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
STATUS DISPLAY.
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 2/3 to select the desired setting.
Each time you press the button, the Status Display
function alternates between ON and OFF.
To cancel the Status Display function, select OFF.
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Confirming the Use Time and Model Name
You can confirm the hours of use and the model name on the
Setup Menu.
This may be necessary when you ask for any service.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Keep pressing 5/ until the second
page of the Setup Menu appears.
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Confirm the hour of use and model
name.
The displayed value for the hours of use is divided by
100. To calculate the actual hours of use, multiply the
displayed value by 100.
The model name shown on the Setup Menu is an
example.
If you have a different model, its correct model name
will be shown (GM-V42PCEG, GM-V42PCEB and
GM-V42S).
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Notes:
The value for the hours of use is added by one hour unit. If
you use the monitor within one hour, it will not be added to
the hours of use.
The period when the monitor is on standby (the power
lamp glows orange) will not be added to the hours of use.
Hours of use
and model
name
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: OFF
: OFF
: MODE1
: 1080i
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x100h
MODEL NAME
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: OFF
: OFF
: 123
: GM-V42PCE
*
1
*
1
24_33_GM_V42[E].p65 03.6.23, 4:43 PM25