Filter
Top Products
22
Video Adjustments (Continued)
2 / 3
5 /
5
VIDEO
DISPLAY
OFF POWER
RM–C579 REMOTE CONTROL UNIT
ON
ASPECT
MUTING
MENU/EXIT
VOLUME
A
COMPO.
/(RGB B)
B RGB A
INPUT SELECT
MENU/EXIT
Setting the COMPONENT/RGB B Input
After connecting the playback device such as a PC or a DVD
player to the COMPONENT/RGB B terminals, you have to
specify which type of signal comes into this terminal—RGB or
component signals.
• Without setting “RGB/COMPO.” correctly, you cannot
show any picture though you select the COMPONENT or
RGB B input.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/∞ to move the cursor (3) to
“FUNCTION SELECT.”
3
Press 3 to display the Function
Selection Menu.
4
Press 5/∞ to move the cursor (3) to
“RGB/COMPO.”
5
Press 2/3 to select the type of signal.
Each time you press the button, the type of signal
accepted alternates between “RGB” and “COMPO.”
RGB: When connecting the playback device such as
a PC, which can emit the RGB signals.
COMPO.: When connecting the playback device such as
a DVD player, which can emit the component
signals.
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit the menu
operations.
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
Cursor (3)
COLOR TEMP.
ASPECT
SIGNAL MODE
RGB/COMPO.
SYNC TERM.
reset
FUNCTION SELECT
ADJUST:
SELECT:
EXIT:
MENU
: HIGH
: PANORAMIC
: AUTO
: RGB
: HIGH
*
*
1
“SIGNAL MODE” appears only when VIDEO A,
VIDEO B, or COMPONENT input is selected.
*
2
“RGB/COMPO.” appears only when the RGB B
or COMPONENT input is selected.
*
3
“SYNC TERM.” appears only when the RGB B
input is selected.
MENU INPUT
MENU INPUT
MENU
2 / 3
5
5 /
*1 *2 *3
14_23_GM_V42[E].p65 03.6.23, 4:43 PM22