JVC GM-V42PCE Computer Monitor User Manual


 
18
Video Adjustments (Continued)
To make an adjustment while viewing the adjustment
bar
After step 3 on page 17, proceed as follows:
1 Press 5/ to move the cursor (3) to sub menu.
2 Press 3 to display the Sub Menu.
The Sub Menu for H SIZE appears on the screen.
3 Press 5/ to select the Sub Menu you want to adjust.
Each time you press the button, the Sub Menu changes as
follows:
4 Press 2/3 to adjust the selected item.
5 Repeat steps 3 and 4 to adjust the other items.
6 Press MENU/EXIT (or MENU on the Monitor) three times
to exit from the menu operations.
To reset the adjustments
After step 3 on page 17, proceed as follows:
1 Press 5/ to move the cursor (3) to reset.
2 Press 3.
The confirmation screen appears.
3 Press 3 again to reset the adjustments.
To cancel the reset, press MENU/EXIT (or MENU on the
Monitor).
Note:
Adjustment values for both horizontal and vertical sizes of
the screen are so related that if one is adjusted up to near
the maximum value, the attainable value of the other will
be decreased.
:+01
H SIZE
+
++
+
Are you sure?
"YES"
then key.
"NO" then key.
MENU
reset
H SIZE H POSITION
V POSITIONCLOCK PHASE
V SIZE
DOT CLOCK
2 / 3
5 /
5
VIDEO
DISPLAY
OFF POWER
RMC579 REMOTE CONTROL UNIT
ON
ASPECT
MUTING
MENU/EXIT
VOLUME
A
COMPO.
/(RGB B)
B RGB A
INPUT SELECT
MENU/EXIT
MENU INPUT
MENU INPUT
MENU
2 / 3
5
5 /
14_23_GM_V42[E].p65 03.6.23, 4:43 PM18