JVC LX-P1010ZE Projector User Manual


 
19
Previous
screen
Push the tab
Pull out
Replacing the battery
Before using the Remote Control Unit
1 While pushing the battery
holder tab to the left, pull out
the battery holder.
2 Insert the battery into the
battery holder so that the + side
is facing upward.
3 Insert the battery holder.
Do not drop the remote control unit.
Keep the remote control unit away from liquids.
Remove the battery if not using the remote control unit for
long periods.
If the remote control becomes inoperable or does not
operate properly, it is likely due to battery dissipation.
Replace the battery with a new one.
Insert the new lithium battery making sure the polarities (+)
and (-) are correct.
Note
WARNING:
Replace battery with CR2025 only. Use of another battery may
present a risk of fire or explosion.
Caution: Battery may explode if mistreated. Dispose of used
battery promptly. Keep away from children. Do not recharge,
disassemble or dispose of in fire.
Remote Control comes with battery inside. Please remove white
protective film before use.