Filter
Top Products
63
Previous
screen
Warning Indicators
This LCD Projector has a STATUS Code Display which calls
your attention to problem conditions existing inside the LCD
Projector. The LCD Projector displays a status Code
Indication each time an internal problem is detected.
If any of the following indications appear in the STATUS Code
Display, immediately turn off the Power Button, and then see
the chart to determine a course of action.
Status Code Display Indications
Please wait 2 minutes before turning the power back on, to
allow the lamp to cool. A much longer time may be required
if the projector had attained an abnormally high internal
temperature.
Note
STATUS Code
display
Continued on the next page...
Example: If the total lamp operating time is over 1 900 hours, the
status codes “L”, “-“, and “1” will be displayed in
sequence.