Filter
Top Products
52
Previous
screen
This LCD Projector allows input of RGB or YPBPR signals
(Component input signal) to the RGB/YPBPR input terminal,
but you will need to change the setting of the input signal
selection manually when changing the signal to be input. If
the input signal selection is not set correctly, a normal image
will not be projected.
The RGB input signal is set at the factory. Please follow the
instructions below to change the input signal.
Setting of the RGB/YPBPR Input Signal Selection
• Setting procedure
1 Press MENU to
display the menu.
3 Press or to select
“RGB/YPBPR”.
4 Press or to
change the input
signal.
Picture
White Balance
Synchronization
Function
Language
Information
RGB/YPBPR
Projection Mode
Expansion
On Screen Display
Auto Lamp Off
Standard (Push ENTER)
•RGB •YPBPR
•Front •Rear
•ON •OFF
•ON •OFF
•YES •NO
Function
DTV Format Signal, such as DVD or digital broadcast, etc. can be
input and projected with this Projector. When using this function,
please refer to correctly connect to the output device of the DTV
Format Signal and perform the following settings correctly.
2 Press or to select
“Function”, and then
ENTER to display the
screen.