Filter
Top Products
25
MULTI-PRINT (DIFFERENT SCENES)
You can print various images (your choice of 2, 4
or 16) on the same print sheet.
Preparation
●See page 12.
●Press INPUT SELECT to select the appropriate input
mode depending on the connection to the source unit
(੬ page 18).
1
PERFORM STEPS
1
–
3
ON PAGE
24
2
PRESS CURSOR TO SELECT
SELECTED PIX
ON
CONTENT,
THEN PRESS
OK
3
BEGIN SOURCE PLAYBACK
4
PRESS MEMORY WHEN THE
DESIRED IMAGE APPEARS
5
PRESS OK
•The stored
image will be
displayed in the
top left corner of
the screen.
•If IrDA (INFRARED) or PC MODE is selected, you
do not have to perform steps
3
and
4
. Refer to page
20 or 38 to send the image you want to print to the
printer.
6
PRESS SOURCE TO CALL UP
THE INPUT DISPLAY
•The screen switches from the stored
to the input display.
7
REPEAT STEPS
4
AND
6
FOR
EACH IMAGE YOU ARE
GOING TO PRINT (2, 4 OR
16) AND STORE THEM
•If you want to cancel the multi-print
operation midway, press MENU.
After MULTI-IMAGE COMPLETED
ADDITIONAL IMAGES MAY NOT
BE ADDED PLEASE WAIT is
displayed on the screen, the MENU
screen appears. Press MENU to exit.
•Even if you have not yet stored the
selected number of images in
memory, you can still print the
images already stored.
8
PRESS PRINT TO START
PRINTING
MULTI PIX MENU
MULTI
:
16
CONTENT : SELECTED PIX
ITEM
[
/
]
OK [OK]
SELECT
[
/
]
QUIT [MENU]