Filter
Top Products
43
OTHER PROBLEMS
This unit is a precision machine which includes a microprocessor. Its operational performance
may be influenced by external noise or disturbance. If normal operation cannot be achieved
even after taking appropriate actions as defined below, the power should be turned off by
unplugging the power cable. Then, reconnect the power by plugging it in again and recheck for
proper operation.
Check to see ifIf
Power won’t turn on
Lamp lights
(or blinks)
Paper is jammed
Ink cassette is empty
Two or more
stacked sheets have
printed
The stored image
has disappeared
Color is weak or
wrong
The image you want
to print from the
playback unit
cannot be called up
on screen
Reference
pages
ⅷ The power cord is unplugged.
ⅷ Take the appropriate action according to LAMP
INDICATIONS on pages 40 – 42. If such an action
fails to solve the problem, turn the power off,
unplug the power cable and wait for a few
minutes. Then, plug the cable in and turn the
power on again.
ⅷ The paper jam may be due to the printer being set
upright or tilted.
ⅷ Remove paper as directed on page 39.
ⅷ Remove the paper tray and check for jammed
paper. If paper is jammed, place the jammed paper
in the tray and load it in the printer.
ⅷ Color print paper sheets have been properly
shuffled. If not, shuffle them thoroughly to separate
each sheet before placing them on the paper tray.
ⅷ The stored picture is erased when you turn the
printer power off or switch between IrDA (IrTran-P)
and DV modes. Carry out the storage procedure
again.
ⅷ Colors are generally acceptable. The colors on the
TV screen may be somewhat different from those
actually printed, which is normal with this Printer.
ⅷ Use the Picture Processor function for picture
adjusment.
ⅷ Printing results may not be normal if you play back
a tape recorded with another camcorder, or if you
store an image on a section of tape that contains
scratches or noise. Try storing it on a different
section.
—
40
|
42
39
15
15
—
34
35
—