EN 43
15. Click [Networking].
16. Click [Internet Protocol (TCP/IP)] and click [Properties].
The “Internet Protocol (TCP/IP) Properties” screen will appear.
17. Click [Obtain an IP address automatically], click [Use the following DNS server
addresses], and enter the DNS server address printed on the document sent from
the provider.
18. After you have entered the addresses, click [OK].
19. Respond with [OK] to the “*** Properties”.
20. Click [x] at the upper right corner of the “Connect ***” screen.
All screens will close and the Internet connection is complete.
04.5.10, 2:11 PM43