Filter
Top Products
19
*1 The TRIG. (trigger) system switches each function by short-circuiting for approx. 1 second.
*2 When selecting the TRIG. (trigger) system, these functions cannot be controlled if no signal is input.
*3 Activates the settings of the items with “R-” or without “R-” in the “MARKER” menu. ☞ “MARKER” on page 12
*4 Tally lamp Control and External control (the 7th pin terminal) can be controlled by the MAKE (make contact) system even
when you select the “TRIG.” (trigger) system.
Operation
1. Short-circuit the 7th pin terminal (External control) to the 8th pin terminal (GND) so that the monitor can be controlled by the
external control.
2. When selecting the “MAKE” (make contact) system, operate each function by short-circuiting the corresponding pin
terminal to the 8th pin terminal (GND) or opening it.
When selecting the “TRIG.” (trigger) system, operate each function by Pulse control, that is short-circuiting the
corresponding pin terminal to the 8th pin terminal (GND) for about 1 second.
NOTES:
• When controlling INP. A/B/C/D, only one terminal must be short-circuited. (Other terminals must be opened.)
• When selecting the “TRIG.” (trigger) system, you can operate only one function at a time. Operate the functions one by one.
Display
INP. A
INP. B
INP. C
INP. D
CO. OFF
MARKER
ASPECT
MA. SEL
TALLY
TA. SEL
STATUS
L. METER
Functions to be controlled
Changes the input to INPUT A
Changes the input to INPUT B
Changes the input to INPUT C
Changes the input to INPUT D
Tu r ns on/off COLOR OFF
Tu r ns on/off MARKER
Changes ASPECT
Selects the MARKER settings
Controls the tally lamp
Selects the color of the tally lamp
Tu r ns on/off the status display
Tu r ns on/off AUDIO LEVEL METER
Opening
Invalid
Invalid
Invalid
Invalid
Off
Off
4:3
Selects the settings without “R-”
Off
Green
Off
Off
Short-circuiting
Valid
Valid
Valid
Valid
On (Monochrome screen)
On
16:9
Selects the settings with “R-”
On
Red
On
On
*1
*2
*2
*3
*4
Functions controlled by the MAKE/TRIGGER Terminal
EN04_LCT1993-001A-f.p65 06.1.5, 18:2419