Filter
Top Products
Document No. 480G3001-001.A00
DataTraveler
®
Locker+ G3
Page 4 of 22
Setup (Windows Environment)
1. Insert the DTL+ G3 into an available USB port on
your notebook or desktop and wait for Windows
to detect it.
Windows XP users will receive a ‘Found New
Hardware’ notification as seen in Figure 2.1.
Windows Vista/7 users will receive a device
driver notification as seen in Figure 2.2.
Once the new hardware detection is complete,
Windows will begin the initialization process.
If the Windows autorun function is enabled,
you can skip the next step and go to page 5 –
Device Initialization.
If the Windows autorun function is disabled, as
it is in Windows 7 by default, you may see an
AutoPlay window similar to the one in Figure
2.3.
2. Select the option ‘Run DTLplus_Launcher.exe’.
If Windows does not AutoPlay, simply browse to the
DVD-RW partition (Figure 2.4) and manually execute
the DTLplus_Launcher program. This will also start
the initialization process.
Figure 2.4 – DTL+ G3 Contents
Figure 2.1 – Found New Hardware
(Windows XP)
Figure 2.2 – Device Driver Installation
(Windows Vista/7)
Figure 2.3 – AutoPlay Window
(Windows Vista/7)
(Note: Menu options in the AutoPlay
window may vary depending on what
programs are currently installed on
your computer. If enabled, AutoRun
will start the initialization process