Filter
Top Products
May 2000 2-1
2 Installing Easy Print Software
This chapter explains how to install the software and configure KODAK
PROFESSIONAL Easy Print to work with your KODAK PROFESSIONAL
Large Format 3000 Series Inkjet Printer.
Minimum System Requirements
You can install Easy Print on a WINDOWS-based or a MACINTOSH
computer that has the following hardware and software installed:
WINDOWS Systems
• 233 Mhz Pentium II processor or higher
• WINDOWS 98, or WINDOWS NT 4.0 with Service Pack 3 or higher
• 15 in. monitor with a resolution of 800 x 600 dpi or higher
• minimum 64 MB of RAM
• 1284 ECP compatible parallel port or a 10/100 Mbit network card
installed
• 6 GB hard drive or greater with a minimum 50 MB of free hard drive
space
Note: For large image rotation at least 200 MB of free hard drive
space is required.
MACINTOSH Systems
• Power Mac G3 or G4 Processor with OS Version 8.6 and 9.0.4 only
• 15 in. monitor with a resolution of 800 x 600 dpi or higher
• minimum 64 MB of RAM
• 1284 ECP compatible parallel port or a 10/100 Mbit network card
installed
• 6 GB hard drive or greater with a minimum 50 MB of free hard drive
space
Note: For large image rotation at least 200 MB of free hard drive
space is required.
Installing the Software
Your system should be up and running before you install Easy Print.
1. Close all open applications.
IMPORTANT: Make sure that all applications are closed and
not just minimized. If you leave any
applications open and try to install the
software, the open applications may interfere
with the installation.