Kodak 5.1 All in One Printer User Manual


 
Troubleshooting
99 www.kodak.com/go/aiosupport
Status lights
The status lights indicate the condition of the printer. There are two status lights on
the printer, one that indicates power, the other indicates Wi-Fi status.
Power status light
Wi-Fi status light
Power light What it means
Off
The printer is turned off.
Press the power button to turn on power.
The printer does not have power.
Make sure that the power cord is plugged into the back of
the printer and into an electrical outlet, and that the
electrical outlet has power.
Blinking
The printer is busy.
Wait for the printer to finish the task.
On
The printer is ready.
Power light What it means
Off The Wi-Fi radio is either turned off, or is turned on but not
connected to a wireless network.
Blinks continuously The Wi-Fi radio is turned on and the printer is searching for
available wireless networks within range.
Blinks intermittently The Wi-Fi radio is turned on and the printer cannot find any
available wireless networks within range, or the Wi-Fi radio
connection has been interrupted, or is too weak to send signals
to and from the printer
To find and connect to an available wireless network within
range, press OK, turn the Wi-Fi radio off, and run the Wi-Fi
Setup Wizard (see
Connecting to a wireless network, page 6).
On The Wi-Fi radio is turned on and there is a working connection
between the printer and a wireless network.