Filter
Top Products
www.kodak.com/go/aiosupport 8
KODAK HERO 5.1 All-in-One Printer
4. If the name of your network is:
5. If your network has security enabled, use the LCD keyboard (see Using the LCD
keyboard, page 10) to enter your security string.
6. When the confirmation message appears, press OK.
When the printer is successfully connected, the Wi-Fi connectivity LED stops
blinking and remains lit.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakHERO5.1+1133).
7. If you haven’t installed the KODAK All-in-One Printer Software:
a. Go to www.kodak.com/go/aiodownloads.
b. In the results list, click the link for KODAK All-in-One Printer Software for
your computer’s operating system.
c. Follow the on-screen instructions.
Listed Not listed
Press to select your
network, then press OK.
Make sure your wireless router is turned on and
within range. If your wireless router does not
broadcast its SSID (network name):
1. Press to select Unlisted Network, then press
OK.
2. Use the LCD keyboard (see Using the LCD
keyboard, page 10) to enter your network name.
3. Select WEP or WPA/WPA2 as required for your
network's security setup, then press OK.
NOTE: If the name of your network is still not listed,
or your want to change your network, press
to select Rescan for Wireless Networks,
then press OK.