Filter
Top Products
NJ750 Training Guide
18
7. Larger than normal ink droplets (0.5- 2 mm) on the media are caused by
excessive pressure in the cartridge. Ensure the cartridge only has 20 ml
of ink inside and the ink reservoirs do not have more than 400 ml of ink
inside. Printer stand surface or floor area must be level and flat.
8. Microbanding is typically caused by incorrect printer calibrations or low
pass printing. Print pass mode of 4 or lower may cause banding. Ensure
all calibrations are performed correctly. Defective or clogged cartridges
may also cause microbanding. Perform printer calibrations and replace
associated cartridge (s) to verify.
208 Jet Cartridge