Filter
Top Products
Introduction
Setting up the 8500
Printer
Operating the 8500
Printer
Troubleshooting
Site Specifications
Accessories and
Supplies
CONTENTS PRINTER DRIVER GUIDE SEARCH HELP
Canceling the continuous printing
When printing two or more copies of one image, you can use
continuous printing. The number of the copies can be set by the printer
driver.
To cancel continuous printing, press the PRINT button for a few
seconds until the ERROR (in green), Parallel and USB lights blink.
After completing the current printing, continuous printing is canceled.
Handling and Storing Prints
The image stability of thermal prints depends upon factors such as
temperature, relative humidity, and exposure to light or to biological or
chemical contaminates. Using XtraLife ribbon increases the stability
and durability of your prints.
Your thermal images will last a long time if you use these guidelines for
handling and storing them:
● Remove prints from the exit area ONLY AFTER the 8500 printer
ejects them.
● Do NOT put a print back into the paper tray. Doing so can cause
jams and loss of completed prints.
● Handle prints as little as possible. When handling prints, make sure
your hands are clean and free of food, oil, and grease. Wear clean
gloves when possible, and hold prints by the edges.