Filter
Top Products
www.kodak.com/go/aiosupport 8
2
Basic Functions
This chapter describes how to print, copy, scan, and fax using the
factory default settings on your printer.
NOTE: To reset your printer to the factory default settings:
1. Press Home.
2. Press to select Printer Settings, then press OK.
3. Press to select Reset All Settings, then press OK.
4. Press OK to reset the settings, then press OK to continue.
Loading originals
You can place originals for copying, scanning, or faxing on the scanner
glass or in the automatic document feeder (ADF). Originals placed in
the ADF are fed into the printer automatically.
Using the scanner glass
To place an original on the scanner glass:
1.
Remove any originals from the automatic document feeder (ADF).
2. Lift the scanner lid, and place the document or picture face down
in the right-front corner.
3. Close the scanner lid.