Kodak 9200 All in One Printer User Manual


 
Basic Functions
11 www.kodak.com/go/aiosupport
To print a picture from a memory card or USB-connected device:
1. Insert the memory card into the appropriate slot, or connect the
digital camera or portable drive to the front USB port.
IMPORTANT: Use only one slot or port at a time.
2. Press or to select the picture you want to print.
3. Press Start to begin printing.
The printer prints a single 4 x 6 in. / 10 x 15 cm picture.
For more information about printing, see the Extended User Guide at
www.kodak.com/go/esp9250support.
Printing from a BLUETOOTH
Technology enabled
device
You can print pictures from wireless devices, such as mobile phones,
digital cameras, and Personal Digital Assistants (PDAs) using the
optional KODAK Wireless 2.0 USB BLUETOOTH Adapter.
To print a picture from a BLUETOOTH Technology enabled device:
1. Insert the KODAK Wireless 2.0 USB BLUETOOTH Adapter into
the front USB port.
2. “Pair” the printer and the device so they can communicate.
NOTE: You must “pair” from your device’s interface. For instructions,
see the user manual for your device.
3. Select the picture you want to print, then select Send to begin
printing.
The printer prints a single 4 x 6 in. / 10 x 15 cm picture.
NOTE: See the user guide for your device for more information.
Front USB port