3/99 11
Setting up the Projector
If you want to project from behind a translucent screen, set up the
projector behind your screen. See “Rear Projection” on page 38
to reverse the image.
If you are installing the projector on the ceiling, refer to the
Ceiling Mount Installation Guide that comes with the optional
Ceiling Mount Kit for more information. To turn the image
upside down, see “Ceiling Projection” on page 38. The Ceiling
Mount Kit is sold separately.
1. Make sure your projector is on a flat surface. It must be
within 10 feet (3 m) of your power source and within 8 feet
(2.4 m) of your computer.
2. Make sure the projector and your computer are turned off.
3. Position the projector the desired distance from the screen
and adjust the focus ring.
• The distance from the lens of the projector to the screen
and the zoom setting determine the size of the projected
image. Figure 2 and Figure 3 show three projected image
sizes. For information about image sizes at minimum and
maximum zoom settings, see “Projected Image Size” on
page 73.