Filter
Top Products
Reference Manual KODAK DP900 / DP1100
18 3/99
Do you want to control your computer’s mouse from
the projector’s remote or keypad?
If your computer has a PS/2 connector, use the PS/2 mouse cable.
1. Unplug the mouse cable from your computer.
Note: A USB mouse is hot-pluggable, meaning you do not
need to re-boot your computer after connecting the
mouse to use it. A PS-2 mouse is not hot-pluggable.
2. Plug the end of the mouse cable into the mouse connector
on your computer.
3. Plug the end of the mouse cable into the connector on
the cable hub.
Figure 8 Connecting monitor, audio and mouse cables to a desktop
computer
mouse cable
monitor cable
audio cable