Filter
Top Products
Setting up the Projector
3/99 17
Connecting a Desktop Computer
1. Locate the cable that connects your monitor to your
computer. Unplug it from the computer.
Note: If you are connecting an older MACINTOSH computer
that does not have a 15-pin connector, you must use the
Mac adaptor between the computer and the cable hub.
2. Plug the end of the cable hub into the monitor connector
on your computer.
Figure 7 Connecting to a desktop computer
Do you want to display the image on your computer’s
monitor as well as on the projection screen?
Note: The projector must be turned on to display the image on
your monitor.
1. Plug your monitor’s cable into the connector on the
cable hub.
Do you want to play your computer’s audio on the
projector?
1. Unplug the audio cable, if present, from your computer.
2. Plug either end of the audio cable into the audio connector on
your computer.
3. Plug the other end of the audio cable into the connector
on the cable hub.