Filter
Top Products
Reference Manual KODAK DP900 / DP1100
52 3/99
Problem: Image is too wide or narrow for screen
• You might need to manually adjust the tracking to
reduce or enlarge the projected image. Refer to
“Manual Tracking” on page 36.
• Adjust the resolution of your video card if it’s greater
than 1024x768.
Problem: Image is out of focus
• Turn the projection lens to focus the image.
• Make sure the projection screen is at least 5 feet
(1.5 m) from the projector.
• Check the projection lens to see if it needs cleaning.
Problem: Image and menus are reversed left to
right
• Rear projection mode is probably turned on. Turn Rear
Projection off in the Controls menu. The image should
immediately return to forward projection. See “Rear
Projection” on page 38.
Problem: the projector displays vertical lines,
“bleeding” or spots
• Adjust the brightness. See “Brightness” on page 32.
• Check the projection lens to see if it needs cleaning.
Problem: no sound
• Adjust volume.
• Verify audio/input connections.
• Adjust audio source.