Filter
Top Products
Setting up the Projector
3/99 15
Connecting a Laptop Computer
Note: Many laptop computers do not automatically turn on
their external video port when a secondary display device
such as a projector is connected. Refer to your computer
manual for the command that activates the external video
port. Activation commands for some laptop computers
are listed in the Appendix C.
1. Plug the end of the cable hub into the video connector on
your laptop.
Figure 5 Connecting to a laptop computer
2. Plug either end of the audio cable into the audio connector on
your computer.
3. Plug the other end of the audio cable into the connector
on the cable hub.
Do you want to control the computer’s mouse from the
projector’s remote or keypad?
If your computer has a PS/2 connector, use the PS/2 mouse cable.
Note: If you are connecting an older MACINTOSH computer
that does not have a 15-pin connector, you must use the
MAC adaptor between the computer and the cable hub.
1. Plug the end of the mouse cable into the mouse connector
on your computer.
2. Plug the end of the mouse cable into the connector on
the cable hub.