Filter
Top Products
Reference Manual KODAK DP900 / DP1100
16 3/99
Figure 6 Connecting audio and mouse cables to a laptop computer
If your computer has a USB connector and is running
Windows 98, use the USB mouse cable
Note: The USB mouse is supported for use with Windows 98
only.
1. Plug the end of the mouse cable into the mouse
connector on your computer.
2. Plug the end of the mouse cable into the connector on
the cable hub.
You must have the appropriate USB drivers installed on your
computer to use the USB feature. Windows 98 ships with the
appropriate drivers.
Note: A USB mouse is hot-pluggable, meaning you do not need
to re-boot your computer after connecting the mouse to
use it. A PS-2 mouse is not hot-pluggable.
Now you’re ready to power up the projector and your laptop.
Skip to “Starting the Projector” on page 22.
audio cable
mouse cable