Kodak i600 Scanner User Manual


 
A-61500 April 2007 4-1
4 The Enhanced Printer
This chapter provides instructions for using the Enhanced Printer. The
following information and procedures can be found in this chapter:
Overview information about the Enhanced Printer, including
information about print fields and printer specifications.
Setting horizontal printer positions.
Replacing the ink cartridge and ink blotter strips.
NOTE: More detailed information on the Enhanced Printer can be found
in the Image Processing Guide, A-61504.
Overview The Kodak i600 Series Scanners include a factory-installed, pre-
configured front printer. The printer operates at full scanner speed. The
printer can add a date, time, document sequential counter, and custom
messages.
The printer is unique in that the document print string can be configured
to include both literal (static) information (i.e., information that stays the
same for each document, such as batch name or operator) and
dynamic information (i.e., information that may change for each page
scanned, such as the document sequential counter). The capture
software application controls static fields; any information that the
software allows you to enter can be sent to the printer.
All printer controls and functions are accessible through the ISIS Driver
or TWAIN Data source. Printing must be enabled or disabled for each
scan session.
NOTES:
Clean the scanner’s paper path components daily when using the
printer.
You cannot print on documents that are smaller than 10 cm (4 in.).
The ink cartridge must be installed prior to powering on the scanner,
or it could result in errors when printing is attempted.