Kodak i600 Scanner User Manual


 
1-4 A-61500 April 2007
Safety information Warning labels
MSDS Material Safety Data Sheets (MSDS) are available on the Kodak
website at: www.kodak.com/go/msds. When accessing the MSDSs
from the website, you will be required to provide the catalog number of
the consumable you want the Material Safety Data Sheet for. See
Chapter 5, “Supplies and accessories” for consumables and catalog
numbers.
User precautions Users and their employer need to observe the common sense
precautions applicable to the operation of any machinery. These
include, but are not limited to, the following:
Do not wear loose clothing, unbuttoned sleeves, etc.
Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.
Hair length should be kept short, using a hair net if needed, or tying
long hair up in a bundle.
Remove all other loose objects from the area that could be drawn into
the machine.
Take sufficient breaks to maintain mental alertness.
Supervisors should review their practices and make compliance with
these precautions a part of the job description for operation of the
scanner or any mechanical device.
Gas springs warning If the gas springs exhibit a sign of decayed performance, call Service
for replacement. Do not attempt to repair.
Environmental
information
The Kodak i600 Series Scanners contain lead in the circuit board
solder. Disposal of this material may be regulated due to
environmental considerations. For disposal or recycling information,
please contact your local authorities or, in the USA, visit the
Electronics Industry Alliance website: www.eiae.org.
The product packaging is recyclable.
The i600 Series Scanners are Energy Star compliant and are shipped
from the factory with the default time set to 15 minutes.
CAUTION: Moving parts, avoid contact.
CAUTION: Hot surface, avoid contact.