Kodak i600 Scanner User Manual


 
5-14 A-61500 April 2007
If you want to replace the tires, proceed as follows:
6. With one hand, press the locking tabs (one on each side) while
holding the bottom housing with the other hand, pull the upper
housing up and away from the rollers.
7. Remove one core assembly.
8. Replace each tire by sliding the tire off the core.
9. Install each new tire by gently pulling it over the core.
IMPORTANT:Do not overstretch the tire; it may tear.
10.Replace the core assembly in the feed module.
11. Repeat the replacement procedure outlined above for the other core
assembly.
Locking tab
Core assembly