Filter
Top Products
Printer options 2
You can define printer options through your application software or by choosing settings
from the printer's control panel. The following printer options are described in this
chapter:
• Initialize (return to printer default settings)
• Print Mode
• Paper Options
• User Setup
Returning to the default settings
Pressing the Setup/User Setup /Init Settings buttons returns all printer options to the
factory defaults. All saved user settings are lost. The table at the end of this chapter
shows the printer defaults.
Printing the settings
Pressing the Setup/User Setup/Print Settings buttons causes the printer to print a
listing of its current settings. Be sure to have media loaded before you start.
Important notes about image size vs. dpi
The printer always prints at 600 dpi. DPI (dots per inch) refers to the resolution at which
your image is created, not the resolution at which it is printed. If your image is created at
300 dpi, it will print at 1/4 the size of the original. Therefore, you will want to save it at
600 dpi before printing.