Filter
Top Products
Using the printer dock plus with a computer
30 www.kodak.com/go/support
Printing from a computer
We recommend using Kodak EasyShare software (included) for printing. This
software lets you take advantage of a wide range of features, including full
color enhancement, red-eye reduction, picture organization, and much more.
If there are no pictures on your computer, use the printer dock to transfer
pictures from your camera or memory card before printing (see page 26).
IMPORTANT:
Wait until printing is complete before removing paper or the paper
tray. Failure to do so can cause paper misfeeds or jams.
Printing with Kodak EasyShare software
1 Make sure Kodak EasyShare software is installed (see page 22) and the
printer dock is connected to your computer (see page 25).
2 Click the My Collection tab.
3 Select the pictures you wish to print.
4 Click the Print at Home tab.
5 Make sure the printer dock is selected as the current printer.
6 Change any other settings, such as paper size and print layout, then click
Print.
NOTE: The Picture Size and Auto-Enhance buttons on the printer dock are disabled when printing
from a computer. Set printing options using EasyShare software.
Printing tagged pictures from your computer
1 Make sure Kodak EasyShare software is installed (see page 22) and the
printer dock is connected to your computer (see page 25).
2 Transfer the tagged pictures to your computer (see page 26).
3 Follow steps 4 through 6 above.
See the EasyShare software Help for details.