Filter
Top Products
Printing without a computer
14 www.kodak.com/go/support
Printing from a Kodak card reader
The Kodak EasyShare printer dock plus is compatible with the Kodak 8-in-1
card reader and the Kodak 6-in-1 card reader (each sold separately). Other
Kodak USB card readers may work with the printer dock plus; however, other
manufacturers’ card readers are not supported.
NOTE: To help you select pictures to print, dock your EasyShare camera (see page 9)
before
connecting the card reader.
1 Open the accessory door on the printer dock.
2 Plug the USB connector from the card reader
into the USB connector located on the side of
the printer dock.
NOTE: If the card reader is already plugged in but the
connection has timed-out, disconnect then reconnect
the USB cable to re-establish a connection.
3 Insert the memory card into the card reader (see your card reader user’s
guide for details). Do not insert more than one card at a time.
The USB device connector light blinks while the printer dock reads the card,
then glows steady green.
■ To print the current picture, press the Print button, .
NOTE: If you tagged pictures for printing using your EasyShare digital camera, instead of
printing the current picture, all tagged pictures will be printed (see page 15).
■ To exit without printing, press the Cancel button, .
Purchase a Kodak 8-in-1 card reader, Kodak 6-in-1 card reader, and other
accessories at a retailer of Kodak products, or visit
www.kodak.com/go/accessories.