Konica Minolta 1390 MF All in One Printer User Manual


 
T- 4 0
(4) The 2nd / 1st digits
It is assigned to indicate detail error description.
Code Status Description Cause Action
000000
Normal
Status
⎯⎯
000001 Stop ⎯⎯
Local mechanical error
1xxx11
ADF JAM
during TX
⎯⎯
1xxx12
ADF Cover
Open during
TX
⎯⎯
1xxx13
Power Fail
during TX
⎯⎯
2xxx14
Memory Full
during RX
⎯⎯
1xxx18 TX Job Lost ⎯⎯
1xxx19
TX Job
deleted
⎯⎯
Dial failure
xxxx15
No Dial
Tone
⎯⎯
xxxx16
Redial All
Failed
(Number
Busy)
⎯⎯
Comm. Error (at Phase-B)
xxxx31
TX T1
Time Out
Did not receive any
response from other side
within the time set by
[Connect Time] of
[415. Fax Maintenance] in
Automatic transmission
Did not receive any
response from other side
within 35 seconds in Man-
ual transmission.
Automatic
transmission:
1.The fax num-
ber is wrong
2.Response
delay in recep-
tion side
Manual trans-
mission:
Failure in
remote machine
Automatic
transmission:
1.Check the fax
number
2.Extension of
Connect Time
Manual transmis-
sion:
Check the status
of the remote
machine
xxxx32
V8 negotia-
tion Fail
V.8 negotiation has failed. Line failure Retry TX
Comm. Error (at Phase-B)
xxxx40 Retry Out
Did not receive any
response from other side
after three retries of DCS
(TCF).
Failure in
remote machine
Line failure
Check the status
of the remote
machine
Retry TX