Konica Minolta 222 Switch User Manual


 
Installing the fax driver
2
Fax Driver 2-22
2.4 Installing the fax driver using Plug and Play
2.4.1 For Windows XP/Server 2003
1 After using a USB or parallel cable to connect this machine to a com-
puter, turn on the computer.
Do not disconnect or connect the cable while the computer is start-
ing up.
2 Insert the printer driver CD-ROM (Driver CD-ROM Vol.1 PCL Driver)
into the computer’s CD-ROM drive.
3 Turn the main power of this machine on.
The Found New Hardware Wizard dialog box appears.
If the Found New Hardware Wizard does not start up, turn the main
power off, then on again.
When turning the power off, then on again, wait at least 10 seconds
before turning the power on again; otherwise, this machine may not
function properly.
4 Select “Install from a list or specific location (Advanced)”, and then
click the [Next] button.
If the Windows connect to Windows Update dialog box appears,
select “NO”.
5 From “Search for the best driver in these locations”, select “Include this
location in the search”, and then click the [Browse] button.
6 Specify the desired folder on the CD-ROM that contains the fax driver,
and then click the [Open] button.
Select the specified folder according to the printer driver to be
used, the operating system, and the language.
Fax driver: “Driver_Fax\Drivers\FAX\Language folder\Win_x86 (for
a 64-bit operating system, "Win_x64")” folder on the Driver CD-
ROM Vol.1 PCL Driver
7 Click the [Next] button, and then follow the on-screen instructions.
When the Windows logo test and Digital Signature dialog box ap-
pears, click the [Continue Anyway] or [YES] button.
8 Click the [Finish] button.
9 When installation is complete, make sure that the icon of the installed
printer appears in the Printers and Faxes window.