Filter
Top Products
bizhub C203/C253/C353 2-177
Setup items by operation
2
When "Bulletin Board User Box" is selected
When "Relay User Box" is selected
When "Annotation User Box" is selected
!
Detail
If "Password Rules" is enabled, no password containing less than eight characters can be registered.
If you have already registered a user password containing less than eight characters, change it to one
using eight characters before enabling "Password Rules". For details on the password rules, refer to
the User manual – Copy Operations.
Item Definition
User Box Number Specify the registration number of the box to be created ("Use opening number" or "Direct
Input").
User Box Name Specify the user box name (up to 20 characters).
To specify the user box password, select the "Use Box Password" check box, and then
specify the password (up to 8 characters).
Type Specify the user box type. Public user boxes can be created only, and they cannot be
changed in Administrator mode.
Auto Delete Document Specify the period during which data in the user box is saved.
Item Definition
User Box Number Specify the registration number of the box to be created ("Use opening number" or "Direct
Input").
User Box Name Specify the user box name (up to 20 characters).
To specify the user box password, select the "Use Box Password" check box, and then
specify the password (up to 8 characters).
Relay Address Specify the relay address.
Relay TX Password Specify the relay TX password (up to 8 characters).
Retype Relay TX Pass-
word
Type in the relay TX password again.
Item Definition
User Box Number Specify the registration number of the box to be created ("Use opening number" or "Direct
Input").
User Box Name Specify the user box name (up to 20 characters).
To specify the user box password, select the "Use Box Password" check box, and then
specify the password (up to 8 characters).
Auto Delete Document Specify the period during which data in the user box is saved.
Count Up Select the counting method. If the user box contains documents, the setting cannot be
specified.
Stamp Elements Specify settings for "Primary Field", "Secondary Field", "Date/Time Setting", "Print Posi-
tion", "Density", and "Number Type"