Filter
Top Products
2
Setup items by operation
2-52 bizhub C203/C253/C353
2.13 Sending scan data by FTP
% Specify settings for sending scan data to the FTP server.
In a network environment with an FTP server, scan data can be sent to a specified folder in the FTP server
on the network. The data sent to the FTP server can be downloaded from a computer on the network. This
function is suitable for transmitting large-sized data, such as high-resolution data.
If a proxy server is available in the network environment, an FTP server on the Internet can be accessed
through the proxy server.
Specify the settings according to the following flowchart.
!
Detail
For details on registering FTP, refer to "Registering or editing an address book destination" on
page 2-182.
For details on the FTP-based file transmission, refer to the User manual – Network Scan/Fax/Network
Fax Operations.
2.13.1 TCP/IP Settings
% Specify settings to use this machine in a TCP/IP network environment.
!
Detail
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 2-3.
TCP/IP Settings
FTP TX Setting
Finish