Konica Minolta C203 All in One Printer User Manual


 
bizhub C203/C253/C353 2-25
Setup items by operation
2
2.8 Sending scan data to a Windows computer
% Specify settings for sending scan data to a Windows computer.
Scan data can be sent directly to a computer specified on the network. In order to perform a Scan to PC
(SMB) operation, first specify shared file settings in Windows on the computer receiving the data.
This machine supports the direct hosting service. To specify a destination computer using the computer
name in the IPv6 environment, the Direct Hosting setting must be enabled. When the Direct Hosting setting
is enabled, the DNS server is used for name resolution to start communication with the computer name
specified and the IPv6 address is acquired. To use the direct hosting service, prepare a DNS server and
specify the DNS settings of this machine correctly.
To specify a computer on another network using Windows name (NetBIOS name), a WINS server must be
used.
Specify the settings according to the following flowchart.
!
Detail
For details on registering SMB addresses, refer to "Registering or editing an address book destination"
on page 2-182.
For details on the SMB-based file transmission, refer to the User manual – Network Scan/Fax/Network
Fax Operations.
2.8.1 TCP/IP Settings
% Specify settings to use this machine in a TCP/IP network environment.
!
Detail
To specify a destination computer using the computer name in the IPv6 environment, the Direct Hosting
setting must be enabled. To enable the Direct Hosting setting, prepare a DNS server and be sure to
specify the DNS settings of this machine correctly.
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 2-3.
TCP/IP Settings
Client Setting
Use the WINS server?
Yes No
Direct Hosting Setting
WINS Setting
Finish