Filter
Top Products
6
Control panel settings
6-10 C300
Control panel settings Chapter 6
3 Type in the password, and then touch [OK].
For details on typing in text, refer to “Entering text” on page 8-3.
4 The Administrator Setting screen appears.
2
Note
If the optional fax kit is not installed, [8 Fax Setting] does not appear.
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
2
Reminder
If “Prohibit Functions when Auth. Error” in Administrator mode is set to
“Mode 2” and an incorrect administrator password is entered the speci-
fied number of times, it is no longer possible to enter Administrator mode.
For details on the “Prohibit Functions when Auth. Error” parameter, refer
to the User’s Guide [Copy Operations].